If you’re not familiar with garage door repair, you may need to call a professional to perform the service for you. The broken door panels can be heavy and will need two people to replace them. If you’re unsure of how to handle the problem, you can watch a video to learn about the parts of the garage. You should also know how to wind the torsion springs. Be sure to follow all safety precautions and avoid injuring yourself when doing the job yourself. You can learn more at Chicago Garage Door-Garage Door
To get started, you can take a few easy DIY steps to fix the broken springs. For instance, replacing weather stripping on the sides of the door is an easy DIY project. Make sure you measure the width of the door and mark it with a pencil. Then, you can use a plunger to remove the dent. If the dent is deeper, you should consider replacing the panels. Likewise, if the automatic opener is broken, you should contact a professional for repairs. This can be a risky and dangerous electrical situation, and you should avoid doing it yourself.
Another simple DIY project involves replacing the weather stripping. This can be done on the sides of the door, underneath it, and between the panels. You may also be able to remove minor dents by using a plunger. However, deeper dents may require replacement of the panels. If the garage door is automatic, you need to contact a professional to fix it. There are many moving parts in an automatic opener that can cause a hazard if not repaired correctly.
If the springs are too old, you may need to replace both. Most professionals recommend replacing both springs. The average torsion spring is rated for 10,000 cycles and can be repaired yourself. This will save you at least $50 on labor. You should consider a new garage door if the existing one is over 5 years old. You may not need a new garage door for the time being, but it may be more expensive than an opener repair.
A broken spring can cost up to $50. Most professionals will recommend replacing both of the torsion springs. These torsion-springs are rated for around 10,000 close/open cycles. The labor charges for replacing one spring will be the same. You will need to replace both springs to ensure that the door will work properly. Most torsion-springs are rated at about 5,000-10,000 cycles. You should always replace both of them if the torsion-springs have become damaged.
Inspecting the torsion springs is another DIY project that you can do on your own. A broken spring may be easy to replace if it’s only damaged by a single spring. You can also repair the torsion-springs by yourself. If you’re not confident with your skills, you can hire a professional. There are no risks in hiring a service to repair your garage door. Just remember to ask around and compare prices from different providers.